The TitanWrap™ mechanical pipeline reinforcement system is specially designed for the repair of aereal, buried and/or submerged pipelines and accessories.
Non-metallic composite coating repairs are used to repair corrosion, dents, and mechanical damage to structures. These repairs are effective due to the restriction in the duct of the radial displacement of the area weakened by the defect when the internal pressure acts on it.
For this restraint to be effective, two things must happen, first, the area weakened by the pipe defect being repaired must deform to transfer the load to the composite, and second, the composite repair must be stiff and strong enough to accept this load. In this case the effective stiffness of the composite material controls the amount of load that is transferred and the strength of the composite controls the amount of load the repair can withstand.
A composite repair is a complex system that must be specifically designed and installed for each repair as required by ASME PCC-2, on the other hand, maintaining high quality standards not only in materials but in application are required for the repair to work properly.
TitanWrap product engineers are ready to assist you in any repair you need, supplying any technical support required to obtain a long lasting repair.
Product Characteristics
Wide application range
Suitable for surface of various structural components: Beams, columns, ventilation tubes, pipes, walls, etc.; It could be used on various types of structural components and systems, e.g. concrete structures, masonry structures, wood structures, steel structures, and many other structural elements and systems.
High strength, high modulus
Very effective in flexural strengthening in the form of straight sheets, shear strengthening in the form of closed loop wrapping, U-shaped and side bonding; Increase ductility and strength of circular columns in the form of transverse wrapping; Restoration of various complex shape structural elements.
Light self-weight
Allows operation in a narrow and tight spaces. Minimal impact on the normal use of the structure during construction. Adds almost no additional weight to the existing structure.
High temperature resistance
Limited creep resistance under high permanent loads, high corrosion resistance and excellent seismic strengthening system.
Anticorrosion
Anti-acid, alkali and other chemicals resistance, corrosion resistance in severe environments and conditions.
Long storage life
Allows for a long storage of products, and help the execution of projects without extended deadlines.
Applications Range
Load Increase
Increased of loads in commercial buildings, increased of traffic weight and volume on bridges, let the installation of heavy equipment in industrial facilities, and increased vibration of structures without any structural concerns.
Aging and Damaged Structures
Aging of old deteriorated construction materials. Corrosion of steel bars in concrete. Vehicles collusion impact on structures (impact damage).
Seismic Retrofitting
Columns wrapping reinforcement for improving, ductility and shear strength. Masonry walls reinforcement for improving out-of-plane bending and in-plane shear strengths. Beam and slab reinforcement.
Improve Structural Condition
Reduce deformations, reduce stresses in existing structural elements. Limit or arrest crack propagation.
Design or Construction Errors
Lack of adequate well-detailed reinforcing bars. Inadequate structural member cross section. Substandard concrete material strength.
Change Structural System (Structural Alterations)
Removal of walls or columns, removal of slab sections for openings.
Applications
• Cooling water lines
• Flare lines
• Blow down lines
• Chemical processing lines
• Energy risers
• Steel pipe
• Stack towers
• Steam piping
• Underwater pipeline
• Storage Tanks and Vessels
Benefits to Using
No Hot Work
Never any need for costly and time-consuming hot work practices with composite repair.
Wide-range of applications
High temp, low temp, pipes, leaks, welds, elbows, nozzles, and more can be repaired.
No unnecessary downtime
Eliminate all the time and cost typically dedicated to cutting and welding, and get back online faster.
Compliant With
• AB-539
• ASME PCC-2
• ISO 24817
• ASME B31
• US DOT
• API
• CSA Z662
TitanWrap
TitanWrap mechanical reinforcement system developed by Inttech Petrol Group LLC is specially designed for the repair of aerial, buried and/or submerged pipelines and accessories.
This system consists of:
TitanWrap Xtreme
The TitanWrap X is formulated for the special conditions found on the internal and external surfaces of production piping, oilfield piping, oil and gas separators, mining and similar equipment that are affected by abrasion, high temperatures, corrosive environments and extreme conditions.
The TitanWrap X system is widely used for the most demanding applications, such as high pressure systems, >2300 psi as well as highly abrassive, high chemical resistance, storage tanks or high temperatures, >90°C as well as leak repair applications among countless others.
This system consists of:
Industries
Contact Us
Manufactured
INTTECH PETROL GROUP
1833 Parkridge Dr.
Norman, OK 73071, USA
Tel. +1-405-618-1237
Distributed